Iris 402 Manuale Utente

The Live View PageThe screen-grab below details the front page of the IP2 camera website.

!!Quick Function Buttons Explained.! !!!Snapshot:!!Press the button to capture an image photo######Record:!!Press the button to start recording. # # P

Video Stream Operations Explained.

Video & Audio: This section describes how to configure the video streaming of the device and the related camera image confi

Image Settings: Brightness:! The luminance of image view. Default value is 8; adjustable from 0 to 16.Contrast: The ratio of l

Advanced Settings (continued):The Advanced Settings panel:Video Settings: Video Stream: This tab provide

Video Format:H.264, MPEG4 and MJPEG are available for the selection. The demand of bandwidth and storage requirement differs from the selection of vid

Privacy Mask (continued): Privacy Mask Window. Audio Settings: Check the “Enable Audio” checkbox to enable v

Network Configuration: The IP Camera acts as a network device. It allows users to configure network functionalities based on appl

RTSP Streaming: The 4 RTSP streaming protocols below are available for different network environments.UDP: This is unicast method in “RT

Important Notices. Read before Use:This instruction manual is intended for administrators and users of the Iris IP2 IP Camera, including instructions

Quality Service (continued): Note: To make the QoS function work, all the switches and routers in the network must support QoS.Acce

Access IP Filter: This setting also provides a basic security by filtering the accesses from other hosts. Enable this function

Recording: This section provides the recording configuration on the camera. Unlike the recording function on the live view page, vid

Recording Plan List (Continued): Destination: the stored path for the recording file Remove: click to delete this recording plan.Add

SD File List: This page provides the facility to search recorded files and images. The SD storage may contain both “triggered-by

Search Records: After the Recording Plan and/or Event Handling (see Event Management) is launched for a certain time, the records held

Event Management: Event management describes the handling of events with the corresponding actions. A common case can be exampled

Event Server List (Continued): Upload Path: Enter the file path that files will be sent to.Media Type: There are 2 typ

Media Type (Continued): Motion Configuration: Up to 3 MD (Motion Detection) areas can be enabled. Each MD can be indi

Motion Configuration (Continued): DI / DO Setting: (Not available on all models. Contact Vendor for details) The DI/DO setting pro

OverviewThe IP2 Network Marine Camera from Iris Innovations packs state of the art Internet Protocol CCTV technology into an incredibly compact, robus

Event List (continued): Click on “Add New” button to reveal the detailed configuration panel.Event Name: Enter an event name, e.

Event List (continued): Action: Two actions are available upon activation of trigger:Digital output: Check the box to enable t

Date and Time: Date and time adjustments for the IP2 camera are defined within this section. Settings can be set to automatic (Syn

User Management: By default, access to the camera is not user authenticated. For security, the IP camera should be restricted to

Maintenance: This page provides tools for camera system maintenances.Reboot: Restarts the camera system Restore to Factory Defa

Install Micro-SD Card (not supported on all models - please check with your vendor for details):The IP2 camera supports on-board Micro-SD storage. Due

Troubleshooting: Check Firmware Version: In the event of a problem occurring with the functionality of the c

Upgrade Device Firmware (continued): Figure 1.Figure 2.Figure 3.

Restore to Default Settings : In certain situations whereby the camera ‘locks up’ or fails to respond to communications / commands

Technical Specifications :

About IP CamerasAn IP camera usually combines a standard CCTV type camera with additional circuitry and software to convert the signal from and commun

Iris Innovations Limited UKUnits 8 & 9 Swanwick Business CentreBridge Road, Swanwick. Hampshire SO31 7GBUnited Kingdom.Tel: +44(0)1489 570797email

Package Contents: Contents may vary depending on model and specific OEM applications.1. IP2 Marine Network Camera2. Waterproof CAT5e E

InstallationWarning: Installation of this product must only be carried out by a marine electronics professional or competent person. Failure to observ

Setup1. Connect the camera to a powered Ethernet source so that the unit is connected directly or indirectly to a DHCP server. 2. The camera will adop

Accessing the CameraViewing Live VideoOnce the camera has been correctly addressed and set up on your network, live video can be viewed in three ways:

Accessing the Camera (Continued...)NVR / CMS Software: The Iris IP2 camera is an ONVIF compatible product. Most ONVIF compatible NVR / CMS software ca